Autowatch Ghost Installers
Many customers are looking for ways to increase their vehicle's security, as car theft via contactless technology is increasing. One option is the Autowatch Ghost immobiliser, which thwarts key cloning and ECU hacking. It's a discrete system that is silent.
The Ghost is a revolutionary immobiliser for the CAN bus that shields your vehicle from key replication, ECU hacking and even remote start. It is compatible with CAN data networks and doesn't require cutting wires.
Installation simplicity
The Autowatch Ghost immobiliser is a revolutionary system that safeguards your car against contactless key cloning and hacking. The system is connected to the vehicle's CAN data network, and requires a unique PIN number before the vehicle can start. This system is a low-cost replacement for expensive alarm systems and trackers. It's important to know the nuances of the system prior to installing it. A deep understanding of its compatibility, professional installation requisites as well as legal implications and operational dynamics is critical to a successful setup.
The Ghost is silent, unlike traditional immobiliser relays. This means that thieves cannot hear it deactivate or activate. In addition to that, the Ghost is compatible with a range of vehicles, including those that have OBD ports. It is simple to transfer between vehicles, making it an excellent option for those who are concerned about theft of their vehicle.
This innovative CANbus system is invisible for diagnostic scans, and cannot be hacked using an instrument designed to hack. Moreover, it can be connected to the OBD port without affecting your warranty. The device does not use radio signals, which makes it difficult to be detected by professional thieves.
ghost immobilisers can be installed in just a few hours by our TASSA registered and DBS security-checked technicians. Installers will connect the Ghost immobiliser to the vehicle harness to block it from being observed and make sure you have the PIN code. The Ghost can be switched to service mode by the press of a button, which is useful for when your vehicle requires servicing or you're arranging work with an independent garage.
Compatibility
Autowatch ghost is a revolutionary immobiliser device that safeguards your vehicle from key-cloning, hacking and theft of relays. It is incorporated discreetly into the wiring harness in your vehicle and operates completely in a quiet manner to ensure that thieves don't hear it working or spot it on the vehicle. The device blocks the engine from starting until you have entered a an exclusive sequence of factory-installed buttons on your steering wheel, door panels and central console that you select to set. You can also change this pin code at any time, which will also be demonstrated at the point of install.
Ghost communicates with your vehicle via the CAN bus, unlike other systems which require additional key fobs or operate on a different radio frequency. It can also be installed without cutting wires. Installation is simple and you will get the most from your system. Professional installers have the knowledge and experience to navigate complicated connections. This minimizes the chance of errors and ensures that your ghost immobiliser is working in the way you intended it to.
Having said that, the disarm sequence can be tricky to understand initially and some users might require assistance with this. Luckily both Autowatch and Car Keys Solutions offer free assistance via phone for any issues with the disarm sequence. You can also refer to the Ghost owner's manual for more details on the procedures.
Professional installation
Autowatch Ghost is a revolutionary immobiliser that guards your vehicle from key cloning, hacking and even key theft. It's hidden within the wiring of your vehicle and doesn't emit radio frequency signals, so thieves aren't able to locate it. It connects to the data network of your vehicle CAN and won't allow you to start your vehicle until you enter a unique pin code. This is accomplished by using the buttons on your steering wheel and centre console and can be changed at any time (this will be shown to you during the install).
The process of installing this highly secure security system is easy, facilitating an effortless integration into your vehicle's electronic architecture. The Ghost isn't requiring any additional wiring and is installed by any qualified installer. Its simplicity also means that it doesn't compromise the reliability of your car's electronic systems.
Prior to executing any security upgrades, it is vital to familiarise yourself with the legal implications of your region. You should be aware that different regions have different guidelines regarding the installation of safety improvements. By observing these guidelines you can avoid legal issues. This proactive approach will enable you to utilize the Ghost's capabilities optimally after installation.
It is important to choose the correct installer for Autowatch Ghost. An installer who is TASSA-approved can install the system quickly and offer an assurance for their work. They will be able to issue you a certificate which shows they are a TASSA approved installer. This gives you the assurance that the installation was done correctly.
Legal implications
Autowatch Ghost is an immobiliser which works to thwart car theft by stopping the engine from running. This discretely installed device works through a unique code that is only known to the owner. It is therefore impossible for copycats or thieves to duplicate. The device is also able to detect if the vehicle has been altered, or taken. This makes it an effective deterrent against attempts to steal.
However, some customers have questions about the legal implications of the system. These concerns mainly centre around the possibility that the use of a Ghost immobiliser could void the warranty of a car. This is an extremely important issue because it could make the system ineffective and lead to costly repairs for car owners. To avoid this, it's essential to look into the essential aspects of autowatch ghost 2 installation, and to study all the relevant legal ramifications.
It is essential to take precautionary steps to guard your vehicle from thieves, because the number of cars being stolen without their owner's keys continues to increase. Cloning tools and door lock pick sets are widely available online making it easy for thieves to scan and copy your keyless remote and ECU. The Autowatch Ghost immobiliser offers unparalleled security against key cloning. It integrates directly with the CAN data network of a vehicle and requires an individual pin code to start the engine. This stops thieves from using cloning or relay attacks.
The Ghost immobiliser can be used with a wide assortment of vehicles, including luxury and sport models. It's also weatherproof, and discrete and therefore won't be easily observed by thieves. It can be used even when your car's being serviced or valeted, as it doesn't reveal the secret pin number to mechanics. Lastly, the Ghost immobiliser is TASSA acknowledged and accepted by a number of insurance companies, meaning it won't cause damage to your car's warranty.
Operational Dynamics
In order to install an auto security system, it is important to understand the workings of the device. This knowledge will ensure that you can use the system efficiently after installation. Understanding its nuances will also help you avoid potential legal complications. This will protect your investment and ensure that the installation goes smoothly.
Autowatch Ghost Immobilisers provide protection against key cloning, hacking and even vehicle theft, securing your vehicle's security completely. The Ghost anti-theft system is completely silent and invisible to thieves, unlike traditional systems that require additional key fobs. This is due to the fact that it doesn't communicate with the CAN data circuit or transmit radio signals. It also blocks relay attacks, which permit criminals to duplicate the key signal.
It makes use of the buttons on your car to create an unique and programmable sequence (similar to the PIN code) that needs to be entered before driving. A certified installer will program the system during a handover. You can also change your PIN at anytime, providing an added layer of security.
The Ghost Immobiliser also has a Service Mode that stops your vehicle from starting or moving after it has been taken to servicing. This feature can be activated by pressing five times the button for Service Mode when dropping off your vehicle to be serviced. This is an extra layer of security that can help keep your car from being taken away. You can avoid having to give your mechanic the pin code for your car alarm.
